Buy "iron age boots" online - search for the best price - compare prices
back to search | Brands A-F | Brands G-M | Brands N-S | Brands T-Z | All Brands
Page (2 of 21) | | 1 2 3 4 5 6 | |
Iron Age starting making the first safety toe shoes in America just after World War I. As the times changed, so did their styles and technologies, but their commitment to quality never wavered. These Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 are part of a long line of excellent products.Today, Iron Age boots are recognized for their fine materials and craftsmanship. These work boots are made with full-grain, tumbled leather uppers in a supple, chestnut brown. Leather is a durable boot material. It's naturally water resistant and also resists abrasions, oils and chemical stains.Inside, moisture-wicking nylon mesh helps keep your feet dry and healthy. This material moves wetness away from your skin and to the outer parts of the boots where it can evaporate. A hefty cushion also keeps your feet comfortable and healthy. Inside these boots, removable EVA cushion inserts with sponge rubber heel wedges provide support.The soles of these Electrical Hazard boots are also designed to resist wear and tear. They have an EVA cushioned midsole with a rubber outsole. The outsole resists oil, chemicals, metal chips, slipping, heat and abrasion. In the end, sure-footedness is the best way to ensure that you're safe on the job, and these Iron Age shoes keep you on your feet.Brown laces tighten up the front and hold down the tongue. Around the ankle of the 6 shaft, padded ankle guards provide protection from knocks and other impacts. A 90-degree heel also guards you from accidents, as its a feature that aids you when climbing ladders. The heels bite into ladder rungs to protect you from slipping.100% non-metallic work boots like these are required by more and more employers. These Iron Age boots don't have any metal--not in the shoe-lace eyelets, nor in the toes. Composite safety toes protect your feet and don't set off metal detectors. And they're electrical-hazard rated, meaning they can protect you from workplace electrical accidents. EH rated footwear reduces the hazards you encounter due to contact of the soles of your shoes with electrically energized parts.No matter what footwear features you need for work, these Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 have it all. They're comfortable, made of high quality materials, and designed for hard-working men.Manufactured Sizes: M 6-12, 13, 14 I W 6-12, 13
Iron Age starting making the first safety toe shoes in America just after World War I. As the times changed, so did their styles and technologies, but their commitment to quality never wavered. These Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 are part of a long line of excellent products.Today, Iron Age boots are recognized for their fine materials and craftsmanship. These work boots are made with full-grain, tumbled leather uppers in a supple, chestnut brown. Leather is a durable boot material. It's naturally water resistant and also resists abrasions, oils and chemical stains.Inside, moisture-wicking nylon mesh helps keep your feet dry and healthy. This material moves wetness away from your skin and to the outer parts of the boots where it can evaporate. A hefty cushion also keeps your feet comfortable and healthy. Inside these boots, removable EVA cushion inserts with sponge rubber heel wedges provide support.The soles of these Electrical Hazard boots are also designed to resist wear and tear. They have an EVA cushioned midsole with a rubber outsole. The outsole resists oil, chemicals, metal chips, slipping, heat and abrasion. In the end, sure-footedness is the best way to ensure that you're safe on the job, and these Iron Age shoes keep you on your feet.Brown laces tighten up the front and hold down the tongue. Around the ankle of the 6 shaft, padded ankle guards provide protection from knocks and other impacts. A 90-degree heel also guards you from accidents, as its a feature that aids you when climbing ladders. The heels bite into ladder rungs to protect you from slipping.100% non-metallic work boots like these are required by more and more employers. These Iron Age boots don't have any metal--not in the shoe-lace eyelets, nor in the toes. Composite safety toes protect your feet and don't set off metal detectors. And they're electrical-hazard rated, meaning they can protect you from workplace electrical accidents. EH rated footwear reduces the hazards you encounter due to contact of the soles of your shoes with electrically energized parts.No matter what footwear features you need for work, these Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 have it all. They're comfortable, made of high quality materials, and designed for hard-working men.Manufactured Sizes: M 6-12, 13, 14 I W 6-12, 13
Iron Age starting making the first safety toe shoes in America just after World War I. As the times changed, so did their styles and technologies, but their commitment to quality never wavered. These Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 are part of a long line of excellent products.Today, Iron Age boots are recognized for their fine materials and craftsmanship. These work boots are made with full-grain, tumbled leather uppers in a supple, chestnut brown. Leather is a durable boot material. It's naturally water resistant and also resists abrasions, oils and chemical stains.Inside, moisture-wicking nylon mesh helps keep your feet dry and healthy. This material moves wetness away from your skin and to the outer parts of the boots where it can evaporate. A hefty cushion also keeps your feet comfortable and healthy. Inside these boots, removable EVA cushion inserts with sponge rubber heel wedges provide support.The soles of these Electrical Hazard boots are also designed to resist wear and tear. They have an EVA cushioned midsole with a rubber outsole. The outsole resists oil, chemicals, metal chips, slipping, heat and abrasion. In the end, sure-footedness is the best way to ensure that you're safe on the job, and these Iron Age shoes keep you on your feet.Brown laces tighten up the front and hold down the tongue. Around the ankle of the 6 shaft, padded ankle guards provide protection from knocks and other impacts. A 90-degree heel also guards you from accidents, as its a feature that aids you when climbing ladders. The heels bite into ladder rungs to protect you from slipping.100% non-metallic work boots like these are required by more and more employers. These Iron Age boots don't have any metal--not in the shoe-lace eyelets, nor in the toes. Composite safety toes protect your feet and don't set off metal detectors. And they're electrical-hazard rated, meaning they can protect you from workplace electrical accidents. EH rated footwear reduces the hazards you encounter due to contact of the soles of your shoes with electrically energized parts.No matter what footwear features you need for work, these Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 have it all. They're comfortable, made of high quality materials, and designed for hard-working men.Manufactured Sizes: M 6-12, 13, 14 I W 6-12, 13
Iron Age starting making the first safety toe shoes in America just after World War I. As the times changed, so did their styles and technologies, but their commitment to quality never wavered. These Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 are part of a long line of excellent products.Today, Iron Age boots are recognized for their fine materials and craftsmanship. These work boots are made with full-grain, tumbled leather uppers in a supple, chestnut brown. Leather is a durable boot material. It's naturally water resistant and also resists abrasions, oils and chemical stains.Inside, moisture-wicking nylon mesh helps keep your feet dry and healthy. This material moves wetness away from your skin and to the outer parts of the boots where it can evaporate. A hefty cushion also keeps your feet comfortable and healthy. Inside these boots, removable EVA cushion inserts with sponge rubber heel wedges provide support.The soles of these Electrical Hazard boots are also designed to resist wear and tear. They have an EVA cushioned midsole with a rubber outsole. The outsole resists oil, chemicals, metal chips, slipping, heat and abrasion. In the end, sure-footedness is the best way to ensure that you're safe on the job, and these Iron Age shoes keep you on your feet.Brown laces tighten up the front and hold down the tongue. Around the ankle of the 6 shaft, padded ankle guards provide protection from knocks and other impacts. A 90-degree heel also guards you from accidents, as its a feature that aids you when climbing ladders. The heels bite into ladder rungs to protect you from slipping.100% non-metallic work boots like these are required by more and more employers. These Iron Age boots don't have any metal--not in the shoe-lace eyelets, nor in the toes. Composite safety toes protect your feet and don't set off metal detectors. And they're electrical-hazard rated, meaning they can protect you from workplace electrical accidents. EH rated footwear reduces the hazards you encounter due to contact of the soles of your shoes with electrically energized parts.No matter what footwear features you need for work, these Iron Age Mens 6 Composite Toe Brown Work Boots IA5002 have it all. They're comfortable, made of high quality materials, and designed for hard-working men.Manufactured Sizes: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
When you're deep under the earth's surface, there's no telling what sort of accidents might happen. Come to think of it--there's really no telling what sorts of accidents will happen on top of it either. For the most dangerous work, the wise Working Man reaches for his Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193.With all sorts of safety features--including waterproofing, a protective toe, and metatarsal guard--these black leather boots really protect your feet. Starting with naturally water-resistant leather, Iron Age added a layer of waterproof material inside of the boots to further protect your feet. Then they layered a sheet of 400 gram Thinsulate Ultra Insulation inside the boots as well. This keeps them warm and dry on your feet.Composite toe guards and internal metatarsal guards ensure that your feet are protected all over. Metatarsal guards shield the tops of your feet from danger from above (Meets ASTM F2413-05 Metatarsal guard standards). Composite toes keep you from crushing your toes or stubbing them (ASTM F2413-05 PT Class 75 Protective Toe).Iron Age has been known for making tough boots for decades. These though, are the toughest that Iron Age makes. Their heat, abrasion and metal chip resistance is unsurpassed in the Iron Age catalogue. In addition, the outsoles have an excellent level of oil and chemical resistance.Tough outsoles are a safety necessity on most jobsites. These Vibram outsoles are meant for very rugged work, and they're reinforced with a puncture-resistant composite plate. Even if you step onto sharp surfaces or nails, these boots won't puncture. They're compliant with ASTM F2413-05 Puncture Resistant Standards. Additionally, they're compliant with ASTM F2413-05 electrical hazard standards. Thus they provide a secondary source of protection from errent electrical currents.Meant to last and last, these boots are made with Goodyear welt construction. Designed to be easily replaceable, yet tough, a Goodyear welt is a highly desirable feature in a boot. In this construction method, the outsoles are sewn to the uppers and then a band of rubber is sewn to the seam. To replace the soles, a cobbler just removes the rubber (the welt), takes off the outsole, and replaces it. Goodyear welts are great because they lengthen the life of your boots.Iron Age makes some of the toughest boots you can find above or below the ground. If you're looking for boots for mining, ironworking, or heavy construction, these Iron Age Men's 10 Waterproof Puncture-resistant Met Guard Mining Boots IA0193 are a safe choice. Don't take risks with your feet--invest in quality footwear today.Sizes Available: M 6-12, 13, 14 I W 6-12, 13
Page (2 of 21) | | 1 2 3 4 5 6 | |
back to search | Brands A-F | Brands G-M | Brands N-S | Brands T-Z | All Brands